Center Pull Hoist Rings

Full Swivel, Pivot Action

  • Process:    Forged
  • Material:    Alloy Steel
  • Finish:       Black Oxide Body Finish with Zinc Plated Gold Washer
  • Threads:   UNC 2A
  • Specifications:  Rated at 5-1 Strength Factor.    Stated Load Capacity based on specific thread torques as shown in chart.  It is recommended that these torques be used when installing Hoist Rings.
  • Origin:       Domestic
Part Number B A C D E F G H Load Capacity
(in Lbs.)**		 Torque
(ft. Lbs.)		 Weight
(in Lbs.)
Thread Size Thread Length Inches Inches Inches Inches Standard Long
16202 2.67 5/16-18 0.56 0.75 0.43 0.38 1.840 1.25 — 800 7 0.3
16204 2.67 3/8-16 0.56 0.75 0.43 0.38 1.840 1.25 — 1,000 12 0.3
16208 4.78 1/2-13 0.75 1.50 0.88 0.75 3.520 2.38 4.25 2,500 28 2.5
16210 4.78 1/2-13 1.00 1.50 0.88 0.75 3.520 2.38 4.25 2,500 28 2.5
16212 4.78 1/2-13 1.25 1.50 0.88 0.75 3.520 2.38 4.25 2,500 28 2.7
16215 4.78 5/8-11 1.00 1.50 0.88 0.75 3.520 2.25 4.19 4,000 60 2.7
16217 4.78 5/8-11 1.25 1.50 0.88 0.75 3.520 2.25 4.19 4,000 60 2.7
16220 4.78 3/4-10 1.00 1.50 0.88 0.75 3.520 2.12 4 5,000 100 3.0
16221 4.78 3/4-10 1.50 1.50 0.88 0.75 3.520 2.12 4 5,000 100 3.0
16225 6.52 7/8-9 1.00 2.31 1.40 1.00 5.140 2.81 4.38 8,000 160 7.0
16227 6.52 7/8-9 1.25 2.31 1.40 1.00 5.140 2.81 4.38 8,000 160 7.0
16230 6.52 1-8 1.50 2.31 1.40 1.00 5.140 2.69 4.38 10,000 230 7.5
16232 6.52 1-8 2.25 2.31 1.40 1.00 5.140 2.69 4.38 10,000 230 7.5
16235 8.73 1 1/4-7 1.88 3.19 1.75 1.25 6.500 4.25 — 15,000 470 14.0
16237 8.73 1 1/4-8 1.88 3.19 1.75 1.25 6.500 4.25 — 15,000 470 14.0
16240 12.47 1 1/2-6 2.75 4.19 2.25 1.75 8.550 6.50 — 24,000 800 33.0
16242 12.47 1 1/2-8 2.75 4.19 2.25 1.75 8.550 6.50 — 24,000 800 33.0
16245 12.47 2-4 1/2 3.12 4.19 2.25 1.75 8.550 6.12 — 30,000 800 36.0
16247 12.47 2-8 3.12 4.19 2.25 1.75 8.550 6.12 — 30,000 800 36.0
16246 16.5 2 1/2-4 4.00 5.75 3.00 2.25 11.720 8.50 — 50,000 2,100 89.0

Swivel Hoist Rings – Metric

Full Swivel, Pivot Action

  • Process:    Forged
  • Material:    Alloy Steel
  • Finish:       Black Oxide Body Finish, with Zinc Plated Gold Washer
  • Threads:    Metric
  • Specifications:     Rated at 5-1 Strength Factor.  Stated Load Capacity based on specific thread torques as shown in chart.  It is recommended that these torques be used when installing Hoist Rings.
  • Origin:        Domestic
Standard Clevis A B C D E F G H Load Capacity
**(In Lbs.)		 Torque
(ft. Lbs.)		 Weight
(in Lbs.)
Part Number Thread Size mm mm Thread Length mm mm mm mm mm
16508M M8 X 1.25 67.8 12.5 19.0 19.0 10.90 9.7 46.7 32.0 400 1.0 0.17
16510M M10 X 1.50 67.8 17.5 19.0 19.0 10.90 9.7 46.7 30.0 450 1.7 0.17
16512M M12 X 1.75 121.4 19.0 38.1 38.1 22.40 19.0 89.4 60.5 1,050 3.8 1.08
16516M M16 X 2.0 121.4 29.0 38.1 38.1 22.40 19.0 89.4 56.5 1,900 8.2 1.12
16520M M20 X 2.5 121.4 34.0 38.1 38.1 22.40 19.0 89.4 52.5 2,150 13.6 1.19
16524M M24 X 3.0 165.6 37.0 58.7 58.7 35.60 25.4 130.6 69.0 4,200 31.0 3.10
16530M M30 X 3.5 221.7 41.9 81.0 81.0 44.50 31.7 165.1 107.4 7,000 60.0 6.30
16536M M36 X 4.0 316.7 63.5 106.4 106.4 57.20 44.4 217.2 166.5 11,000 100.0 15.50
16542M M42 X 4.5 316.7 68.0 106.4 106.4 57.20 44.4 217.2 160.5 12,500 100.0 16.00
16548M M48 X 5.0 316.7 88.0 106.4 106.4 57.20 44.4 217.2 154.5 13,500 100.0 16.80

Request Information

CAD drawings are available in our CAD Library, or can be furnished upon request

Request information - Lifting Products

Manufacturing Capabilities

Learn about our custom manufacturing capabilities