Turnbuckle Bodies

Cleveland City Forge is a manufacturer of turnbuckles. During the fabrication process, turnbuckles are drop forged from special bar quality steel, threaded right and left hand Class 2B and supplied either plain finish to hot-dip galvanized.

Galvanizing meets or exceeds requirements of ASTM Specification A 153.

Specifications

Specifications

Material: C-1030/C-1035, 316 Stainless Steel, SA-182-F11, F22
Threads: U.N.C./U.N.F. Class 2B, Metric
Finish: Self-Colored, Galvanized, Plated, Electro-Polished
Options: Heat Treating, Special Threading
Origin: Domestic or Import

Max Work Loads

Working Loads

Maximum working loads have been established with a design factor of 5:1 or 3:1 (AISC) and are calculated using C-1030/C-1035 Carbon Steel. Maximum Working load results on other materials offered are available upon request. The loads imposed upon any turnbuckle should never exceed the maximum working load shown. Selection of a turnbuckle with a maximum working load adequate to meet the required design load is the responsibility of each purchaser or end user. CCF turnbuckles meet the requirements of ASTM F1145-92 Type 1 Grade 1, up to 2 1/2”.

Order Requirements

Order Requirements

Specify Diameter and take up needed
Specify Material Required
Specify finish

Turnbuckles are furnished with hex ends to 2”. Round ends furnished 2-1/4” and larger.

PLAIN PN	HDG PN (Oversize Taps)	Thread Dia. A	Turnbuckle	Take Up T	Body Length L (in.)	Nut End B	Rated Capacity (Lbs.)		Unit Weight (Lbs.)
							5:01	3:1
TB01300-0001	TB01310-0002	3/8	X	6	7 1/8	9/16	1200	2000	0.78
TBX8300-0000	TBX8310-0001	1/2	X	4	5 9/16	15/16	2200	3670	1.38
TBX8300-0001	TBX8310-0001	1/2	X	6	7 9/16	25/32	2200	3670	1.58
TB06300-0001	TB06310-0001	1/2	X	9	10 9/16	25/32	2200	3670	1.75
TB07300-0001	TB07310-0001	1/2	X	12	13 9/16	25/32	2200	3670	2.14
TBX8300-0001	TBX8310-0001	5/8	X	3	4 7/8	15/16	3500	5830	2.18
TB08300-0000	TB08310-0001	5/8	X	4	5 7/8	15/16	3500	5830	2.2
TB09300-0001	TB09310-0001	5/8	X	6	7 7/8	15/16	3500	5830	2.23
TB10300-0001	TB10310-0002	5/8	X	9	10 7/8	15/16	3500	5830	2.7
TB11300-0001	TB11310-0001	5/8	X	12	13 7/8	15/16	3500	5830	3.2
TB13300-0001	TB13310-0001	3/4	X	6	8 1/8	1 1/16	5200	8670	3.28
TB14300-0001	TB14310-0001	3/4	X	9	11 1/8	1 1/16	5200	8670	4.05
TB15300-0001	TB15310-0001	3/4	X	12	14 1/8	1 1/16	5200	8670	4.81
TB18300-0001	TB18310-0001	7/8	X	6	8 5/8	1 5/16	7200	12000	4.5
TB19300-0001	TB19310-0001	7/8	X	12	14 7/8	1 7/16	7200	12000	6.7
TB21300-0001	TB21310-0001	1	X	6	8 7/8	1 7/16	9300	15500	6.32
TB23300-0001	TB23310-0001	1	X	12	14 7/8	1 7/16	9300	15500	8.8
B26300-0001	B26310-0001	1 1/8	X	6	9 1/8	1 9/16	11600	19300	8.05
TB27300-0001	TB27310-0001	1 1/8	X	12	15 1/8	1 9/16	15200	25300	9.74
TB29300-0001	TB29310-0001	1 1/4	X	6	9 1/8	1 9/16	15200	25300	4
TB30300-0001	TB30310-0001	1 1/4	X	12	15 1/8	1 9/16	15200	25300	9.74
TB33300-0001	TB33310-0001	1 3/8	X	6	9 5/8	1 13/16	17400	29000	6.15
TB34300-0002	TB34310-0002	1 3/8	X	12	15 3/4	1 7/8	17400	29000	9.7
TB35300-0001	TB35310-0001	1 1/2	X	6	9 3/4	1 7/8	21000	35000	6.15
TB36300-0001	TB36310-0001	1 1/2	X	12	15 3/4	1 7/8	21000	35000	9.74
TB39300-0002	TB39310-0001	1 5/8	X	6	11	2 1/4	24500	40900	9.8
TB40300-0001	TB40310-0001	1 5/8	X	12	17 1/2	2 1/4	26000	43300	13.5
TB41300-0001	TB41310-0001	1 3/4	X	6	11	2 1/2	28000	47200	9.8
TB42300-0001	TB42310-0001	1 3/4	X	12	17	2 1/2	28000	47200	15.25
TB45300-0001	TB45310-0001	1 7/8	X	6	11 5/8	2 13/16	37000	62000	14
TB46300-0001	TB46310-0001	1 7/8	X	12	17 1/2	2 3/4	37000	62000	15.25
TB49300-0001	TB49310-0001	2	X	6	11 5/8	2 3/4	37000	62000	14
TB50300-0001	TB50310-0002	2	X	12	17 1/2	2 3/4	37000	62000	15.25
TB53300-0001	TB53310-0001	2 1/4	X	6	12 5/8	3 5/16	48000	80000	19.6
TB54300-0001	TB54310-0001	2 1/4	X	12	19 5/8	3 5/16	48000	80000	30.92
TB57300-0001	TB57310-0001	2 3/8	X	6	13 1/2	3 3/4	62500	104200	23.25
TB58300-0001	TB58310-0001	2 3/8	X	12	19 1/2	3 3/4	62500	109000	33.72
TB59300-0001	TB59310-0001	2 1/2	X	6	13 1/2	3 3/4	60000	100000	23.92
TB63300-0001	TB63310-0001	2 1/2	X	12	14 3/8	4 3/16	75000	125000	31.5
TB65300-0001	TB65310-0002	2 3/4	X	12	22 1/2	5 1/4	79000	131700	60.5
TB67300-0001	TB67310-0001	2 7/8	X	6	14 3/4	4 3/8	79400	132300	39.5
TB68300-0001	TB68310-0001	3	X	6	14 5/8	4 5/16	96700	161000	39.5
TB70300-0001	TB70310-0001	3	X	12	22 1/2	5 1/4	100000	173300	60.5
TB80300-0001	TB80310-0002	3 1/4	X	6	16 7/8	5 7/16	104000	173300	60.5
TB82300-0001	TB82310-0001	3 1/4	X	12	22 1/2	5 1/4	104000	104000	79.5
TB83300-0001	TB83310-0002	3 1/2	X	6	16 7/8	5 7/16	122000	203300	60.5
TB87300-0001	TB87310-0001	3 1/2	X	12	22 1/2	6 1/4	122000	203300	79.5
TB88300-0001	TB88310-0001	3 3/4	X	6	18	6	167800	280000	95
TB93300-0001	TB93310-0001	4	X	6	18	6	167800	280000	95
TB98300-0001	TB98310-0001	4 1/2	X	9	22 1/2	6 3/4	233800	389000	152

Turnbuckle – Eye & Eye Carbon

Forged Carbon Steel Assembly

Process: Forged
Material: Carbon Steel
Finish: Self-Colored, Galvanized
Threads: UNC / UNF 2B, Metric
Specifications: ASTM F1145, Class D
Origin: Domestic (Round Eye design) or Import (Oval Eye design)

Self Colored Part Number	Hot Galvanized Part Number	Import Hot Galvanized Part Number	Thread Diameter	Take-Up	Average Overall Length Closed	Weight Lbs.
10004	10704*	25000	1/4"	4 1/2	8 5/8	0.25
10008	10708	25005	5/16	4 1/2	8 13/16	0.52
10012	10712	25010	3/8	6	11 7/8	0.79
10016	10716	25015	1/2	6	13 1/4	1.48
10020	10720	—	1/2	9	16 3/8	1.96
10024	10724	25025	1/2	12	20 1/2	2.20
10028	10728	25030	5/8	6	13 3/4	2.29
10032	10732	25035	5/8	9	19 1/4	3.00
10036	10736	25040	5/8	12	21 3/8	3.69
10040	10740	25045	3/4	6	17 3/4	3.90
10044	10744	25050	3/4	9	18 7/8	4.58
10048	10748	25055	3/4	12	21 3/4	5.18
10064	10764	25080	1	6	21 1/4	7.50
10068	10768	25085	1	12	25 1/4	8.62

Turnbuckle – Eye & Eye Stainless

Forged Stainless Steel Assembly

Process: Forged
Material: 304 or 316 Stainless Steel
Finish: Self-Colored, Polished
Threads: UNC / UNF 2B, Metric
Origin: Domestic

Part Number	Thread Diameter	Take-Up	Average Overall Length Closed	Weight Lbs.
SS10012	3/8	6	8 5/8	0.79
SS10016	1/2	6	12 5/8	1.67
SS10028	5/8	6	15 1/4	2.72
SS10040	3/4	6	16 1/5	4.40

Turnbuckle – Hook & Eye

Forged Carbon Steel Assembly

Process: Forged
Material: Carbon Steel
Finish: Self-Colored, Galvanized
Threads: UNC / UNF 2B, Metric
Origin: Domestic (Round Eye design) or Import (Oval Eye design)
Specifications: ASTM F1145, Class F

Self Colored Part Number	Hot Galvanized Part Number	Import Hot Galvanized Part Number	Thread Diameter	Take-Up	Average Overall Length Closed	Weight Lbs.
10104	10804*	25100	1/4"	4 1/2	8 5/8	0.25
10108	10808	25105	5/16	4 1/2	8 13/16	0.44
10112	10812	25110	3/8	6	11 7/8	0.79
10116	10816	25115	1/2	6	13 1/4	1.51
10120	10820	25120	1/2	9	16 3/8	1.81
10124	10824	25125	1/2	12	20 1/2	2.20
10128	10828	25130	5/8	6	13 3/4	2.50
10132	10832	25135	5/8	9	19 1/4	3.00
10136	10836	25140	5/8	12	21 3/8	3.60
10140	10840	25145	3/4	6	17 3/4	3.90
10144	10844	25150	3/4	9	20 3/4	4.60
10148	10848	25155	3/4	12	21 3/4	5.30
—	—	25160	3/4	18	29 3/4	7.20
—	—	25165	7/8	6	24 1/4	7.60
10156	10856	25170	7/8	12	27 1/4	8.30
—	—	25175	7/8	18	33 1/4	10.60
10164	10864	25180	1	6	21 1/4	10.00
10168	10868	25185	1	12	26 5/8	12.22

Turnbuckle – Hook & Hook

Forged Carbon Steel Assembly

Process: Forged
Material: Carbon Steel
Finish: Self-Colored, Galvanized
Threads: UNC / UNF 2B, Metric
Specifications: ASTM F1145, Class E
Origin: Domestic or Import

Self Colored Part Number	Hot Galvanized Part Number	Import Hot Galvanized Part Number	Thread Diameter	Take-Up	Average Overall Length Closed	Weight Lbs.
10204	10904*	25200	1/4"	4 1/2	8 5/8	0.25
10208	10908	25205	5/16	4 1/2	8 13/16	0.44
10212	10912	25210	3/8	6	11 7/8	0.79
10216	10916	25215	1/2	6	13 1/4	1.51
10220	10920	25220	1/2	9	16 3/8	1.81
10224	10924	25225	1/2	12	20 1/2	2.20
10228	10928	25230	5/8	6	13 3/4	2.50
10232	10932	25235	5/8	9	19 1/4	3.00
10236	10936	25240	5/8	12	21 3/8	3.60
10240	10940	25245	3/4	6	17 3/4	3.90
10244	10944	25255	3/4	9	20 3/4	4.60
10248	—	25260	3/4	12	21 3/4	5.30
—	—	25260	3/4	18	29 3/4	7.20
10256	10956	—	7/8	12	27 1/4	7.60
10264	10964	—	1	6	21 1/4	7.50
10268	10968	25285	1	12	26 5/8	10.00
—	—	25290	1	18	32 1/2	12.22

Turnbuckle – Jaw & Eye Carbon

Forged Carbon Steel Assembly

Process: Forged
Material: Carbon Steel
Finish: Self-Colored, Galvanized
Threads: UNC / UNF, Metric
Origin: Domestic (Round Eye design) or Import (Oval Eye design)
Specifications: ASTM F1145, Class H

Part Number	Import Hot Galvanized Part Number	Thread Diameter	Take-Up	Average Overall Length Closed	Weight Lbs.
11004	25300	1/4"	4 1/2	8 1/2	0.43
11008	25305	5/16	4 1/2	9	0.53
11012	25310	3/8	6	12	1.05
11016	25315	1/2	6	12 3/4	1.68
11020	25320	1/2	9	16 3/8	1.81
11024	25325	1/2	12	19 1/2	2.20
11028	25330	5/8	6	14 3/4	2.59
11032	25335	5/8	9	18 3/4	3.97
11036	25340	5/8	12	21 3/8	4.35
11040	25345	3/4	6	16	4.26
11044	25350	3/4	9	20 3/4	4.58
11048	25355	3/4	12	23	5.32
—	25360	3/4	18	26 5/8	8.05
—	25365	7/8	6	7 3/4	8.25
—	25370	7/8	12	19 3/4	8.75
—	25375	7/8	18	31 1/2	11.82
11064	25380	1	6	21 1/4	9.20
11068	25385	1	12	25 1/2	11.57
—	25390	1	18	32 1/2	14.20

Turnbuckle – Jaw & Eye Stainless

Forged Stainless Steel Assembly

Process: Forged
Material: 304 or 316 Stainless Steel
Finish: Self-Colored, Polished
Threads: UNC / UNF 2B, Metric
Origin: Domestic (Round Eye design) or Import (Oval Eye design)

Part Number	Thread Diameter	Take-Up	Average Overall Length Closed	Weight Lbs.
SS11012	3/8	6	11 1/2	0.96
SS11016	1/2	6	13 3/8	1.66
SS11028	5/8	6	16	2.53
SS11040	3/4	6	17	4.14

Turnbuckle – Jaw & Jaw Carbon

Forged Carbon Steel Assembly

Process: Forged
Material: Carbon Steel
Finish: Self-Colored, Galvanized
Threads: UNC / UNF 2B, Metric
Origin: Domestic or Import
Specifications: ASTM F1145 Glass G

Part Number	Import Hot Galvanized Part Number	Thread Diameter	Take-Up	Average Overall Length Closed	Weight Lbs.
11104	25400*	1/4"	4 1/2	8 1/2	0.28
11108	25405	5/16	4 1/2	9	0.53
11112	25410	3/8	6	12	0.85
11116	25415	1/2	6	13	1.64
11120	25420	1/2	9	16 3/8	1.95
11124	25425	1/2	12	20 1/2	2.40
11128	25430	5/8	6	16	2.75
—	25435	5/8	9	18 3/4	3.97
11136	25440	5/8	12	22	4.35
11140	25445	3/4	6	17	4.50
11144	25450	3/4	9	20 3/4	4.98
11148	25455	3/4	12	23	5.78
—	25460	3/4	18	29	7.60
—	25465	7/8	6	16	8.25
—	25470	7/8	12	19 3/4	8.75
—	25475	7/8	18	31 1/2	11.82
11164	25480	1	6	18	9.20
11168	25485	1	12	25 1/2	12.10
11172	25490	1	18	36	14.20

Turnbuckle – Jaw & Jaw Stainless

Forged Stainless Steel Assembly

Process: Forged
Material: 304 or 316 Stainless Steel
Finish: Self-Colored, Polished
Threads: UNC / UNF 2B, Metric
Origin: Domestic or Import

Part Number	Thread Diameter	Take-Up	Average Overall Length Closed	Weight Lbs.
SS11112	3/8	6	12 3/8	1.07
SS11116	1/2	6	9	1.69
SS11128	5/8	6	12	2.75
SS11140	3/4	6	13	4.50

Turnbuckle – Stub & Stub

Forged Carbon Steel Assembly

Process: Forged
Material: Carbon Steel
Finish: Self-Colored, Galvanized
Threads: UNC / UNF 2B, Metric
Specifications: ASTM F1145-92 Class C
Origin: Domestic

Part Number	D Diameter & Thread	O Take-Up	H Nut End	L Average Overall Closed Length	Weight Lbs.	Rated Capacity
10504	1/4-20	4 1/2	7/16	10.500	0.360	500
10508	5/16-18	4 1/2	7/16	10.500	0.440	800
10512	3/8-16	6	5/8	13.000	0.840	1,200
10514	1/2-13	3	1	8.000	1.140	2,200
10516	1/2-13	6	11/16	14.000	1.390	2,200
10520	1/2-13	9	15/32	20.000	2.130	2,200
10524	1/2-13	12	11/16	22.000	2.530	2,200
10526	5/8-11	3	1	12.000	1.508	3,500
10528	5/8-11	6	1	15.000	2.098	3,500
10532	5/8-11	9	1 5/32	18.000	2.626	3,500
10536	5/8-11	12	1 5/32	21.250	4.320	3,500
10540	3/4-10	6	1 5/32	16.000	3.420	5,200
10544	3/4-10	9	1 5/32	22.000	4.674	5,200
10548	3/4-10	12	1 5/32	21.500	4.816	5,200
10554	7/8-9	6	1 5/16	17.000	4.426	7,200
10556	7/8-9	12	1 3/8	22.625	7.392	7,200
10564	1-8	6	1 3/8	18.000	5.828	10,000
10568	1-8	12	1 3/8	30.000	9.494	10,000
10572	1-8	18	1 3/8	29.000	10.552	10,000
10576	1 1/8-7	6	1 1/2	18.625	7.540	15,000
10580	1 1/4-7	6	1 11/16	19.125	9.590	15,200
10584	1 1/2-6	6	1 7/8	20.250	15.340	21,000

Hook End Fittings

Forged Carbon Steel

Process: Forged
Material: Carbon Steel
Finish: Self-Colored, Galvanized
Threads: UNC / UNF 2A, Metric
Origin: Domestic or Import

Self Colored Part Number	Hot Galvanized Part Number	A Thread Diameter	Take-Up	B Shank Length	C	D	Thread	Approx. Weight Lbs.	Rated Capacity
10205	*10905	1/4	4 1/2	3	0.48	0.47	RH	0.692	300
10206	*10906	1/4	4 1/2	3	0.48	0.47	LH	0.692	300
10209	10909	5/16	4 1/2	3	0.55	0.50	RH	0.147	500
10210	10910	5/16	4 1/2	3	0.55	0.50	LH	0.147	500
10213	10913	3/8	6	4	0.71	0.52	RH	0.230	700
10214	10914	3/8	6	4	0.71	0.52	LH	0.230	700
10217	10917	1/2	6	4	0.87	0.69	RH	0.594	1,040
10218	10918	1/2	6	4	0.87	0.69	LH	0.594	1,040
10221	10921	1/2	9	6 1/4	0.87	0.69	RH	0.560	1,040
10222	10922	1/2	9	6 1/4	0.87	0.69	LH	0.560	1,040
10225	10925	1/2	12	7 3/4	0.87	0.69	RH	0.580	1,040
10226	10926	1/2	12	7 3/4	0.87	0.69	LH	0.580	1,040
10229	10929	5/8	6	5	1.00	0.88	RH	0.882	1,600
10230	10930	5/8	6	5	1.00	0.88	LH	0.882	1,600
10233	10933	5/8	9	6 5/8	1.00	0.88	RH	0.960	1,600
10234	10934	5/8	9	6 5/8	1.00	0.88	LH	0.998	1,600
10237	10937	5/8	12	8 1/8	1.00	0.88	RH	0.998	1,600
10238	10938	5/8	12	8 1/8	1.00	0.88	LH	1.080	1,600
10241	10941	3/4	6	5 1/8	1.07	0.95	RH	1.302	2,000
10242	10942	3/4	6	5 1/8	1.07	0.95	LH	1.302	2,000
10245	10945	3/4	9	6 5/8	1.07	0.95	RH	1.486	2,000
10246	10946	3/4	9	6 5/8	1.07	0.95	LH	1.486	2,000
10249	10949	3/4	12	8 1/8	1.07	0.95	RH	1.600	2,000
10250	10950	3/4	12	8 1/8	1.07	0.95	LH	1.600	2,000
10257	10957	7/8	12	9	1.07	1.22	RH	2.440	2,400
10258	10958	7/8	12	9	1.07	1.22	LH	2.440	2,400
10265	10965	1	6	5 5/8	1.08	0.95	RH	3.116	2,900
10266	10966	1	6	5 5/8	1.08	0.95	LH	3.116	2,900
10269	10969	1	12	8 1/2	1.08	0.95	RH	3.386	2,900
10270	10970	1	12	8 1/2	1.08	0.95	LH	3.386	2,900

Jaw End Fittings

Forged Carbon Steel

Process: Forged
Material: Carbon Steel
Finish: Self-Colored, Galvanized
Threads: UNC / UNF 2A, Metric
Origin: Domestic or Import

Hot Galvanized Part Number	A Thread Size	Take-Up	B Jaw Width of Jaw	C Inside Width of Jaw	D Outside Width of Jaw	Pin Hole Diameter	F Outside Diameter	G Shank Length	Thread	Weight Lbs.	Rated Capacity Lbs.
11105	1/4-20	4 1/2	3	0.440	0.970	0.300	0.630	3.000	RH	0.090	500
11106	1/4-20	4 1/2	3	0.440	0.970	0.300	0.630	3.000	LH	0.090	500
11109	5/16-18	4 1/2	1.410	0.475	1.025	0.300	0.690	3.000	RH	0.138	800
11110	5/16-18	4 1/2	1.400	0.475	1.025	0.300	0.690	3.000	LH	0.138	800
11113	3/8-16	6	1.500	0.550	1.130	0.360	0.810	4.000	RH	0.226	1,200
11114	3/8-16	6	1.500	0.550	1.130	0.360	0.810	4.000	LH	0.226	1,200
11117	1/2-13	6	1.865	0.670	1.455	0.420	1.000	4.000	RH	0.420	2,100
11118	1/2-13	6	1.865	0.670	1.455	0.420	1.000	4.000	LH	0.420	2,100
11121	1/2-13	9	1.865	0.670	1.455	0.420	1.000	6.250	RH	0.508	2,100
11122	1/2-13	9	1.865	0.670	1.455	0.420	1.000	6.250	LH	0.508	2,100
11125	1/2-13	12	1.865	0.670	1.455	0.420	1.000	7.750	RH	0.560	2,100
11126	1/2-13	12	1.865	0.670	1.455	0.420	1.000	7.750	LH	0.560	2,100
11129	5/8-11	6	2.350	0.810	1.700	0.550	1.310	5.000	RH	0.826	3,200
11130	5/8-11	6	2.350	0.810	1.700	0.550	1.310	5.000	LH	0.826	3,200
11133	5/8-11	9	2.350	0.810	1.700	0.550	1.310	6.625	RH	0.982	3,200
11134	5/8-11	9	2.350	0.810	1.700	0.550	1.310	6.625	LH	0.982	3,200
11137	5/8-11	12	2.350	0.810	1.700	0.550	1.310	8.125	RH	1.024	3,200
11138	5/8-11	12	2.350	0.810	1.700	0.550	1.310	8.125	LH	1.024	3,200
11141	3/4-10	6	2.675	0.940	2.025	0.690	1.620	5.125	RH	1.260	5,000
11142	3/4-10	6	2.675	0.940	2.025	0.690	1.620	5.125	LH	1.260	5,000
11145	3/4-10	9	2.675	0.940	1.975	0.690	1.620	6.625	RH	1.422	5,000
11146	3/4-10	9	2.675	0.940	1.975	0.690	1.620	6.625	LH	1.422	5,000
11149	3/4-10	12	2.675	0.940	1.985	0.690	1.620	8.125	RH	1.550	5,000
11150	3/4-10	12	2.675	0.940	1.985	0.690	1.620	8.125	LH	1.550	5,000
11153	3/4-10	18	2.800	0.940	2.040	0.690	1.620	11.125	RH	1.928	5,000
11154	3/4-10	18	2.800	0.940	2.040	0.690	1.620	11.125	LH	1.928	5,000
11157	7/8-9	12	3.200	1.200	2.425	0.810	1.880	9.000	RH	2.344	7,000
11158	7/8-9	12	3.200	1.200	2.425	0.810	1.880	9.000	LH	2.344	7,000
11161	7/8-9	18	3.200	1.200	2.400	0.810	1.880	12.000	RH	2.668	7,000
11162	7/8-9	18	3.200	1.200	2.400	0.810	1.880	12.000	LH	2.668	7,000
11165	1-8	6	3.625	1.330	2.650	0.940	2.120	5.625	RH	2.606	10,000
11166	1-8	6	3.625	1.330	2.650	0.940	2.120	5.625	LH	2.606	10,000
11169	1-8	12	3.625	1.330	2.650	0.940	2.120	8.500	RH	3.220	10,000
11170	1-8	12	3.625	1.330	2.650	0.940	2.120	8.500	LH	3.220	10,000
11173	1-8	18	3.625	1.330	2.650	0.940	2.120	11.250	RH	3.740	10,000
11174	1-8	18	3.625	1.330	2.650	0.940	2.120	11.250	LH	3.740	10,000

Round Eye Fittings

Forged Carbon Steel

Process: Forged
Material: Carbon Steel
Finish: Self-Colored, Galvanized
Threads: UNC / UNF 2A, Metric
Origin: Domestic

Self Colored Part Number	Hot Galvanized Part Number	A Thread Size	Take-Up	B Inside Diameter	C Outside Diameter	D Cross-Section Diameter	E Shank Length	Thread	Weight Lbs.	Rated Capacity
10005	10705	1/4-20	4	1/2	1	1/4	3	RH	0.078	500
10006	10706	1/4-20	4	1/2	1	1/4	3	LH	0.078	500
10009	10709	5/16-18	4 1/2	5/8	1 1/4	5/16	3	RH	0.122	800
10010	10710	5/16-18	4 1/2	5/8	1 1/4	5/16	3	LH	0.122	800
10013	10713	3/8-16	6	13/16	1 1/2	3/8	4	RH	0.214	1,040
10014	10714	3/8-16	6	13/16	1 1/2	3/8	4	LH	0.214	1,040
10017	10717	1/2-13	6	1	2	7/16	4	RH	0.426	1,800
10018	10718	1/2-13	6	1	2	7/16	4	LH	0.426	1,800
10021	10721	1/2-13	9	1	2	7/16	6 1/4	RH	0.548	1,800
10022	10722	1/2-13	9	1	2	7/16	6 1/4	LH	0.548	1,800
10025	10725	1/2-13	12	1 1/8	2	7/16	7 3/4	RH	0.606	1,800
10026	10726	1/2-13	12	1 1/8	2	7/16	7 3/4	LH	0.606	1,800
10029	10729	5/8-11	6	1 19/64	2 1/4	9/16	5	RH	0.830	2,700
10030	10730	5/8-11	6	1 19/64	2 1/4	9/16	5	LH	0.830	2,700
10033	10733	5/8-11	9	1 1/4	2 1/2	9/16	6 5/8	RH	1.048	2,700
10034	10734	5/8-11	9	1 1/4	2 1/2	9/16	6 5/8	LH	1.048	2,700
10037	10737	5/8-11	12	1 1/4	2 1/2	9/16	8 1/8	RH	1.122	2,700
10038	10738	5/8-11	12	1 1/4	2 1/2	9/16	8 1/8	LH	1.122	2,700
10041	10741	3/4-10	6	1 1/2	3	21/32	4 7/8	RH	1.156	4,000
10042	10742	3/4-10	6	1 1/2	3	21/32	4 7/8	LH	1.156	4,000
10045	10745	3/4-10	9	1 1/2	3	21/32	6 5/8	RH	1.634	4,000
10046	10746	3/4-10	9	1 1/2	3	21/32	6 5/8	LH	1.634	4,000
10049	10749	3/4-10	12	1 1/2	3	21/32	8	RH	1.732	4,000
10050	10750	3/4-10	12	1 1/2	3	21/32	8	LH	1.732	4,000
10057	—	7/8-9	12	1 3/4	3 1/2	3/4	9	RH	2.770	7,000
10058	—	7/8-9	12	1 3/4	3 1/2	3/4	9	LH	2.770	7,000
10061	10761	7/8-9	18	1 68/99	3 1/2	3/4	12	RH	2.896	7,000
10062	10762	7/8-9	18	1 68/99	3 1/2	3/4	12	LH	2.896	7,000
10065	10765	1-8	6	2	3 7/8	7/8	5 3/4	RH	2.576	8,500
10066	10766	1-8	6	2	3 7/8	7/8	5 3/4	LH	2.576	8,500
10069	10769	1-8	12	1 13/16	4	7/8	8 1/2	RH	3.724	8,500
10070	10770	1-8	12	1 13/16	4	7/8	8 1/2	LH	3.724	8,500

Stub End Fittings

Forged Carbon Steel

Process: Forged
Material: Carbon Steel
Finish: Self-Colored, Galvanized
Threads: UNC / UNF 2A, Metric
Origin: Domestic

Part Number	D Thread Size	Take-Up	Thread	S Stub Length	T Min Thread Length	Weight Lbs.	Rated Capacity Lbs.
10502	1/4-20	4.500	RH	5 1/4	2 3/4	0.054	500
10503	1/4-20	4.500	LH	5 1/4	2 3/4	0.054	500
10507	5/16-18	4.500	LH	5 1/4	2 3/4	0.100	800
10510	3/8-16	6.000	RH	6 1/2	4 1/16	0.180	1,200
10511	3/8-16	6.000	LH	6 1/2	4 1/16	0.180	1,200
10513	1/2-13	3.000	RH	4	2 9/16	0.276	2,200
10514	1/2-13	3.000	LH	4	2 9/16	0.276	2,200
10517	1/2-13	6.000	RH	7	4 3/16	0.390	2,200
10518	1/2-13	6.000	LH	7	4 3/16	0.390	2,200
10519	1/2-13	9.000	RH	10	5 9/16	0.560	2,200
10521	1/2-13	9.000	LH	10	5 9/16	0.560	2,200
10522	1/2-13	12.000	RH	13	7 1/16	0.720	2,200
10523	1/2-13	12.000	LH	13	7 1/16	0.750	2,200
10529	5/8-11	6.000	RH	7 1/2	4 1/4	0.660	3,500
10530	5/8-11	6.000	LH	7 1/2	4 1/4	0.660	3,500
10533	5/8-11	9.000	RH	10 1/2	5 3/4	0.920	3,500
10534	5/8-11	9.000	LH	10 1/2	5 3/4	0.920	3,500
10537	5/8-11	12.000	RH	10 1/2	7	0.920	3,500
10538	5/8-11	12.000	LH	10 1/2	7	0.920	3,500
10542	3/4-10	6.000	RH	8	4 5/16	0.910	5,200
10543	3/4-10	6.000	LH	8	4 5/199	0.910	5,200
10544	3/4-10	9.000	RH	11	5 3/16	1.380	5,200
10545	3/4-10	9.000	LH	11	5 3/16	1.380	5,200
10547	3/4-10	12.000	RH	14	7 5/16	1.750	5,200
10549	3/4-10	12.000	LH	14	7 5/16	1.750	5,200
10550	3/4-10	18.000	RH	13 3/4	10 1/8	1.650	5,200
10551	3/4-10	18.000	LH	13 3/4	10 1/8	1.650	5,200
10553	7/8-9	6.000	RH	8 1/2	4 1/2	1.320	7,200
10555	7/8-9	6.000	LH	8 1/2	4 1/2	1.320	7,200
10557	7/8-9	12.000	RH	14 1/2	7 1/2	2.470	7,200
10558	7/8-9	12.000	LH	14 1/2	7 1/2	2.470	7,200
10561	7/8-9	18.000	RH	14 1/4	10 3/8	2.158	7,200
10562	7/8-9	18.000	LH	14 1/4	10 3/8	2.158	7,200
10565	1-8	6.000	RH	9	5 1/8	1.800	10,000
10566	1-8	6.000	LH	9	5 1/8	1.800	10,000
10569	1-8	12.000	RH	15	8 1/8	3.350	10,000
10570	1-8	12.000	LH	15	8 1/8	3.350	10,000
10573	1-8	18.000	RH	14 1/2	10 5/8	2.838	10,000
10574	1-8	18.000	LH	14 1/2	10 5/8	2.838	10,000
10577	1 1/8-7	6.000	RH	9 1/2	5 1/4	2.390	15,000
10578	1 1/8-7	6.000	LH	9 1/2	5 1/4	2.390	15,000
10581	1 1/4-7	6.000	RH	9 9/16	5 5/16	3.080	15,200
10582	1 1/4-7	6.000	LH	9 9/16	5 5/16	3.080	15,200
10585	1 1/2-6	6.000	RH	10 1/8	5 3/4	4.590	21,000
10586	1 1/2-6	6.000	LH	10 1/8	5 3/4	4.590	21,000

Anchor Shackle

Bent Wire Eyes

C-Clamps

Chain & Hook Hardware

Clevises & Clevis Pins

Elevator Rail

Eye Nuts

Eyebolts

Flanges

Heavy Hex Nuts

Hoist Rings

Pad Eyes

Recessed Nuts & Pins

Rod Ends

Swage Flemish Eye Sleeves

Swage Sockets – Open & Closed

Threaded Rods